SETUP

PLEASE READ CAREFULLY BEFORE INSTALLATION!!!

FIRST OF ALL, (If there is a "protective film" on your phone screen or "camera lens protector", you must REMOVE them.) Any extra protective accessory may prevent the case from closing properly!
At the bottom of the case there are 2 plastic locks. Push them outward to unlock and separate the case into two parts.
IMPORTANT; Without REMOVING the protective films on the case, place your phone inside the case, close it and lock it. (Reason for this; we cannot ACCEPT RETURNS for products whose films have been removed, because they cannot be resold.) If your phone fits perfectly inside the case and you can close it properly, you may proceed with the following steps to complete the installation.
Make sure you remove all protective films from the case you received. (front glass, back glass and camera films — note! some models have films both inside and outside)
Then check that the button areas on the right and left sides are properly aligned and place your phone onto the back glass panel.
After making sure your phone is properly positioned, align the front screen protector starting from the top side and place it on top. It will automatically close due to the magnetic system.
Check the case from the sides to ensure there are no gaps. If there is any part that is not properly seated, press gently to secure it.
Finally, lock the 2 plastic locks at the bottom inward.
Congratulations, you have successfully completed the case installation.